Advantech PPC-A84 User Manual page 115

WDT Active When Power ON WDT Active When Power ON WDT Active When Power ON WDT Active When Power ON WDT Active When Power ON
This is Advantech's patented watchdog function which can reboot the
system should the computer hang in the BIOS checkup.
The options are: 62 sec (Default), Disabled, 31 sec, 15 sec.
Onboar Onboar d Serial Ports 1 & 2 d Serial Ports 1 & 2
Onboar Onboar Onboard Serial Ports 1 & 2 d Serial Ports 1 & 2 d Serial Ports 1 & 2
If the serial ports use the onboard I/O controller, you can modify your
serial port parameters.
The options for Port 1 are: 3F8/IRQ4 (Default), 2E8/IRQ3, Disabled,
2F8/IRQ3, 3E8/IRQ4.
The options for Port 2 are: 2F8/IRQ3 (Default), 3E8/IRQ4, 2E8/IRQ3,
Disabled, 3F8/IRQ4.
IR Addr IR Addr IR Addr IR Address Select IR Addr ess Select ess Select ess Select ess Select
When enabled, the infrared receptor is activated.
The options are: Disabled (Default), Enabled.
Onboar Onboard Parallel Port Onboar d Parallel Port d Parallel Port d Parallel Port
Onboar Onboar d Parallel Port
If the parallel port uses the onboard I/O controller, you can modify your
parallel port paramaters. When you select "Disabled", the next two setup
items will disappear.
The options are: 378/IRQ7 (Default), 3BC/IRQ7, 278/IRQ5, Disabled.
Parallel Port Mode Parallel Port Mode Parallel Port Mode
Parallel Port Mode Parallel Port Mode
You can choose different data transfer modes for your system.
The options are: ECP & EPP (Default), SPP, EPP, ECP.
ECP Mode Use DMA ECP Mode Use DMA
ECP Mode Use DMA ECP Mode Use DMA ECP Mode Use DMA
You can choose different DMA modes for data transfer.
The options are: 3 (Default), 1.
Onboar Onboar d Serial Ports 3 & 4 d Serial Ports 3 & 4
Onboar Onboard Serial Ports 3 & 4 Onboar d Serial Ports 3 & 4 d Serial Ports 3 & 4
If the serial ports use the onboard I/O controller, you can modify your
serial port parameters.
Chapter 8 Award BIOS Setup 101