Table of Contents
Advertisement
8. Remove the front bezel carefully by a flat screwdriver.
9. Unscrew the six screws on the LCD holding plate to seperate the
LCD cabinet and LCD holding plate.
10. Detach the LCD cabinet.
11. Detach the LCD by unscrewing the four screws located on each of
the corners.
12. The touchscreen is stuck on the LCD holding plate by a strongly
double-side adhesive tape. We do not recommend you to remove
it unless the touchscreen is detective and you would like to
replace it.
Note:
114
PPC-123 User's Manual
Because of the modular design of the LCD and
touchscreen, you do not disassemble the whole
system step by step if you would like to replace the
defective LCD or touchscreen. You just start disas-
sembling the module from step 8. Then, you can
easily remove the LCD and touchscreen by step 9 to
step 12.
Advertisement
Table of Contents
