The Printer Setup Menu - Epson SureColor F7170 User Manual

The Printer Setup Menu

indicates default settings.
Item
Side Margin(Right)
Side Margin(Left)
Print Start Position
Media Size Check
Media End Check
Media Skew Check
Print Nozzle Pattern
Periodical Cleaning
Parameter Explanation
3 to 25 mm (0.12 to Choose the width of the right margin when media is loaded in the
1.00 inch) printer.
For more information, see "Printable area" on page 80
3 to 25 mm (0.12 to Choose the width of the left margin when media is loaded in the printer.
1.00 inch)
For more information, see "Printable area" on page 80
0 to 800 mm (0.00 Adjust this parameter if you want to print from the near center of the
to 32.00 inch) media or if you want to shift the printed area left from the Side
Margin(Right) setting. The area between the right edge of the media
and Print Start Position is left blank. If a value is selected for Side
Margin(Right), an additional area corresponding to the width selected
for Side Margin(Right) will be left blank.
For more information, see "Printable area" on page 80
On Choose whether the printer automatically detects (On), or does not
automatically detect (Off), the edges of the media. Try Off if the printer
Off
displays a Media Size Error when the media is correctly loaded. Note,
however, that the printer may print beyond the edges of the media when
Off is selected. Ink used outside the edges of the media will stain the
inside of the printer. We generally recommend to operate with this
setting set to On.
On Choose whether the printer automatically detects (On) or does not
automatically detect (Off), the end of the media. Try Off if the printer
Off
displays Media Out when the media is correctly loaded. We generally
recommend to operate with this setting set to On.
On When skewed media is detected, the printer will either stop printing and
display an error (On) or continue printing (Off). On is recommended in
Off
most circumstances, as skewed media may cause the printer to jam.
Off Choose the frequency with which the printer prints a nozzle test pattern:
never (Off) or once every 1 to 10 pages. Periodic test patterns will not be
1 to 10 pages
printed while Off is selected. To print a test pattern at the top of every 1
to 10 pages, select an option between 1 and 10. When printing is
complete, you can visually inspect the pattern to determine whether
there may be faint or missing colors in the preceding or following
printout.
Using the Control Panel Menu 124