Epson SureColor F7170 User Manual page 36

9. Tighten the roll holder screw to fix the roll holder in place.
Important:
If the roll holder fixing screw is loose, the roll holder may move during printing. This could
cause stripes and unevenness in the prints.
10. Rotate the handle until part A in the illustration below is fully inserted.
Important:
Once part A is hidden, do not turn the handle any further. Failure to observe this precaution
could damage the roll holder.
If part A is still visible even after the handle has been turned fully, rewind the handle.
Loosen the roll holder fixing screw on the right side, and then restart from Step 8.
Basic Operations 36