Epson SureColor F7170 User Manual page 53

9. Rotate the handle until part A in the illustration below is fully inserted.
Important:
Once part A is hidden, do not turn the handle any further. Failure to observe this precaution
could damage the roll core holder.
If part A is not hidden even after turning the handle until it can no longer be turned, the roll
core holder may not be fully inserted. Return to step 6.
For information on take-up with the printed side out, see the following section.
For information on take-up with the printed side in, see "Take-Up With the Printed Side
Facing In" on page 58.
Take-Up With the Printed Side Facing Out
1. Pass the media under the media guide bar, and then attach the media to the take-up
roll core.
Basic Operations 53