Epson SureColor F7170 User Manual page 140

6. Pull the media to the cutter groove and use a cutter to remove torn or creased portions.
7. Manually rewind the cut media.
8. Remove any media that remains inside the printer.
9. Turn on the power to the printer and perform a nozzle check.
Check the printed pattern, and if there are any clogs, perform head cleaning. See
"Checking for Clogged Nozzles" on page 84.
Important:
If the printer is left off for an extended period, the print head will be left uncapped and dry
out, and will not print properly when printing resumes.
Turning the printer on automatically caps the print head.
Reload the media and resume printing. See "Loading Media" on page 31.
Media is not fed straight or not taken up well
If media is not fed straight and printing or take-up problems occur, use a roll core with a
width of 64 inches and adjustment paper to perform parallel adjustment for the media
feeding unit and auto take-up reel unit.
This adjustment requires two persons because the front and rear side of the printer must
be checked and adjusted simultaneously.
Problem Solver 140