Epson SureColor F7170 User Manual page 11

21 Chip unit check lamp
This lamp turns on when a message related to the chip unit is displayed.
On: An error occurred. Check the message on the control panel's screen.
Off: No error.
22 AC inlets #1 and #2
Connect the power cables. Make sure you connect both cables.
23 LAN port
See "LAN port" on page 13.
24 USB port
Connects the USB cable.
25 Maintenance cover (right)
Open this cover to perform maintenance around the print head. Normally closed when using the printer.
See "Maintenance Around the Print Head" on page 88.
26 Media loading lever
After loading media, lower the media loading lever to keep the media in place. Raise the lever to release the media prior to
removal.
27 Alert lamp
This lamp lights or flashes when an error occurs.
On/flashing: An error has occurred; the type of error is indicated by how the lamp lights or flashes. Check the message on
the control panel's screen.
Off: No error.
28 Control panel
See "Control Panel" on page 16.
29 Front cover
Open when loading media, cleaning the inside of the printer, or removing jammed media. Normally closed when using the
printer.
Introduction 11