4. Insert the roll core into the right roll holder. Insert the left roll core holder into the roll
core, and then tighten the roll core holder locking screw.
Important:
Insert the left roll holder into the roll core until part A in the illustration below cannot be
seen, and then tighten the roll holder locking screw.
5. Move the adjustment paper to a position 5 cm (2 inches) from the left edge of the roll
core, and then insert it into the printer. Keep the adjustment paper taut, place a ruler on
the front side of the white line on the platen, and then draw a line with a pen or other
writing instrument.
Problem Solver
150