Back - Epson SureColor F7170 User Manual

7 Caps
Except during printing, these caps cover the print head nozzles to prevent them from drying out. Cleaning may be required.
See "Part Cleaning" on page 89.
8 Wiper
The wiper removes ink from the print head nozzles. Cleaning or replacement may be required.
See "Part Cleaning" on page 89
See "Replacing the Wiper and Wiper Cleaner" on page 101.

Back

1 Drive switch
The drive switch is used to feed the media during loading and to rewind the media for replacement.
2 Roll holder
Place media on these holders. There are two holders: one on the left and one on the right.
3 Roll holder fixing screw
These screws fix the roll holders in place once the media has been installed. There are two screws: one on the left and one on
the right.
4 Roll holder lever
If the media to be mounted on the roll holders seems heavy, use these levers to raise the media effortlessly to the level of the
roll holders. There are two levers: one on the left and one on the right.
5 Loading guide
Media is loaded along this guide.
6 Roll support
Rest media on these supports before placing it on the roll holders. There are two supports: one on the left and one on the right.
Introduction 15