Epson SureColor F7170 User Manual page 70

1. Use the d/u buttons to select Multi-Strike Printing and press the Z button.
2. Use the d/u buttons to choose a value.
3. Select the desired option and press the Z button.
4. Press the y button to return to the customize settings menu.
Roll Type
Choose Printable Side Out or Printable Side In according to how the media is rolled.
1. Use the d/u buttons to select Roll Type and press the Z button.
2. Use the d/u buttons to select the desired setting and press the Z button.
3. Select the desired option and press the Z button.
Tension Measurement
Periodically is recommended in most circumstances. Choose Off if slack develops in the
media or other printing problems occur.
1. Use the d/u buttons to select Tension Measurement and press the Z button.
2. Use the d/u buttons to select the desired setting and press the Z button.
3. Select the desired option and press the Z button.
Feeding Tension
Feeding Tension has 2 settings: Auto and Manual.
The default setting of Auto is recommended in most situations. If creases appear during
printing or black bands (dark stripes) appear in the prints, set Feeding Tension to Manual.
We recommend setting Feeding Tension to the value below that complies the width of the
loaded media.
If other values are used, banding (horizontal banding, lines, or strips of uneven color) or
wrinkles may appear in the prints.
Recommended values for Feeding Tension by media width
Value of Feeding Tension (when Tension Measurement is
Periodically/Every Page)
64 52 44 42
Lv28 Lv23 Lv19 Lv19
Basic Operations
36 24
Lv16 Lv11
70