Epson SureColor F7170 User Manual page 161

The control panel display keeps turning off.
Is the printer in sleep mode?
o
The printer enters sleep mode when the Heat Off Timer expires and the heaters turn off. The time before the after heater
turns off can be selected using the Printer Setup menu. See "The Printer Setup Menu" on page 124.
The after heater will be reactivated and sleep mode will end when a print job is received, the media loading lever is used, or
another operation involving printer hardware is performed.
The red light is on inside the printer.
This is not a failure.
o
The red light normally stays on inside the printer.
The administrator password has been forgotten.
Reset the password.
o
At the Network Setup menu of the control panel, run Restore Settings, and then set a new password. See "The Network Setup
Menu" on page 128.
Problem Solver 161