Auto Scan Function - Icom IC-M24 Instruction Manual

D Auto Scan function
The Auto Scan function automatically starts a normal or
priority scan when no signal is received, and no operation is
performed for 30 seconds.
Push
Auto scan OFF (default)
D Dual/Tri-watch function
Set the watch type to Dualwatch or Tri-watch. (p. 16)
Push
Dualwatch function
(default)
D Monitor key action
"AS"
The monitor key temporarily opens the squelch. This item sets
the key action.
• Pu (PUSH) : The Monitor function is activated by holding down
• Ho (HOLD) : The Monitor function is activated by holding down
Auto scan ON
"dt"
Push setting (default)
Tri-watch function
SET MODE
[MONI] (VOL/SQL). The squelch stays open while
holding down the key.
[MONI] (VOL/SQL) for 1 second. The squelch stays
open until any key is pushed.
Push
7
"Sq"
1
2
3
4
5
6
7
8
9
10
Hold setting
11
12
13
14
15
16
19