Auto Scan Function - Icom IC-M34 Instruction Manual

D Auto scan function
The auto scan function starts the desired scan automatically
when no signal is received, and no operation is performed for
30 sec.
Push
Auto scan OFF (default)
D Dual/Tri-watch function
This item selects dual or tri-watch as desired. See p. 16 for
details.
Push
Dualwatch function
(default)
D Monitor key action
"AS"
The monitor key opens the squelch temporarily. This key ac-
tion contains PUSH (Pu) or HOLD (Ho) settings as shown
below.
• Pu (PUSH): After pushing [MONI]
• Ho (HOLD): After pushing [MONI]
Auto scan ON
"dt"
Push setting (default)
D Automatic Backlighting
This function is convenient for nighttime operation. The back-
light can be selected from ON and OFF.
Tri-watch function
• The backlight is automatically activated when any key except for
[PTT] is pushed.
• The backlight is automatically turned OFF after 5 sec. of inactivity.
Auto backlighting ON
(SQL)
and emits audio. The squelch is held open while contin-
uously pushing and holding [MONI]
(SQL)
opens and emits audio even while [MONI]
leased. To close the squelch, push any key.
Push
Push
(default)
7
SET MODE
"Sq"
for 1 sec., the squelch opens
. (default)
(SQL)
for 1 sec., the squelch
is re-
(SQL)
Hold setting
"bL"
Auto backlighting OFF
7
19