Auto Scan Function; Automatic Backlighting - Icom IC-M36 Instruction Manual

D Auto scan function
The auto scan function starts normal or priority scan auto-
matically when no signal is received, and no operation is
performed for 30 sec.
Push
Auto scan OFF (default)
D Dual/Tri-watch function
This item can be set as dual or tri-watch. (p. 16)
Push
Dualwatch function
(default)
D Monitor key action
The monitor key opens the squelch temporarily. This item sets
the key action.
• Pu (PUSH) : The monitor function is activated by pushing and
holding [VOL/SQL MONI] for 1 sec. The squelch
opens while holding down the key. (default)
• Ho (HOLD) : The monitor function is activated by pushing and
holding [VOL/SQL MONI] for 1 sec. The squelch
stays open until any key is pushed.
"AS"
Push setting (default)
D Automatic Backlighting
This function is convenient for night-time operation. The
backlight can be selected from ON and OFF.
Auto scan ON
• The backlight is automatically activated when any key except for
[PTT] is pushed.
"dt"
• The backlight is automatically turned OFF after 5 sec. of inactivity.
Auto backlighting ON
Tri-watch function
D LCD contrast setting
"Sq"
Set the LCD contrast level from High contrast and Low con-
trast.
The LCD contrast level makes no difference for indoor use.
High contrast (default)
Push
Push
(default)
Push
7
SET MODE
Hold setting
"bL"
Auto backlighting OFF
"LC"
Low contrast
1
2
3
4
5.
6
7
8
9
10
11
12
13
14
15.
16
19