Hard Drive - HP ENVY m6 Maintenance And Service Manual

Hard drive

NOTE: The hard drive spare part kit does not include the hard drive bracket or hard drive connector cable.
The hard drive bracket and screws are included in the Hard Drive Hardware Kit, spare part number
812686-001. The hard drive cable is available using spare part number 812697-001.
Description
Hard drive, 2.0-TB, 5400-rpm, 9.5-mm
Hard drive, 1.0-TB, 5400-rpm, 9.5-mm
Hard drive, 750-GB, 5400-rpm, 9.5-mm
Hard Drive Hardware Kit (includes bracket and screws)
Hard drive cable
Before removing the hard drive, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the hard drive:
1. Disconnect the hard drive cable from the system board (1).
2. Remove the four Phillips PM2.5×3.0 screws (2) that secure the hard drive assembly to the computer.
46 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page 44).
29).
Spare part number
801808-001
833907-005
778190-005
812686-001
812697-001