HP ENVY m6 Maintenance And Service Manual page 57

5. Disconnect the six cables from the connectors that the speaker cable is routed under (2).
For proper cable routing, see
6. Remove the two broadhead Phillips PM2.0×2.0 screws (3) that secure the speaker to the computer.
NOTE: The speaker includes rubber isolators (4) around the screws. These isolators are crucial to the
performance of the speakers.
NOTE: Note the way the speaker cable is routed near the RTC battery (5).
7. Remove the speaker cable from its routing path (6).
8. Remove the speaker (7).
Reverse this procedure to install the speakers.
Cable routing on page 50 .
Component replacement procedures 49