HP ENVY m6 Maintenance And Service Manual page 67

The display rear cover is available using spare part number 812671-001.
The display raw panel is available using spare part number 813016-001 for antiglare, touch panels,
828730-001 for antiglare, non-touch panels, and 812702-001 for BrightView, non-touch panels. The
raw panel kit includes touch panel, touch board, bezel, rubber supports, display cable, webcam, and
screws.
a. Remove the two screw covers (1) and two Phillips PM2.5×3.5 screws (2) that secure the display
rear cover to the display.
b. Work a plastic tool around the seam to separate the display rear cover from the display (3).
c. Remove the display rear cover (4).
d. Rotate the hinges open as far as possible.
e. Lift the display hinge covers off the display (1).
Component replacement procedures 59