Fan - HP ENVY m6 Maintenance And Service Manual

2. Remove the RJ-45 door (2).
Reverse this procedure to install the RJ-45 door.

Fan

Description
Fan (includes cable)
Before removing the fan, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
36 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page 29).
Spare part number
812682-001