HP ENVY m6 Maintenance And Service Manual page 74

3. To remove the display panel:
a. Remove the four Phillips PM2.0×3.0 screws (1) that secure the display panel to the enclosure.
b. Rotate the display panel out of the enclosure (2) to gain access to the display cable connection on
the back of the panel.
c. On the back of the display panel, release the adhesive strip (1) that secures the display panel cable
to the display panel, and then disconnect the cable (2).
d. Remove the display panel from the computer (3).
4. To remove the display hinges:
66 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts