Oki OKIPAGE 6e Service Manual page 121

Category
LCD status message
Daily status
(for OKIPAGE6ex, in
HP 4 mode)
Troubleshooting
Table 6-2 (Cont'd)
This message is displayed when the
RESET
printer cannot reset automatically to
TO SAVE
exit from the menu because there
are data and DLL's and macros
having temporary attributes when
the printer is changed from set
mode to other mode.
Toner is running out.
This message is displayed together
TONERLOW
with other message on the first line.
Normal operation can be continued.
A fault occurred in the tonersensor.
TONERSNS
This message is displayed together
with other message on the first line.
Normal operation can be continued.
This message is displayed together
with other message on the first line.
CHG DRUM
Normal operation can be continued.
Trouble or status
6 - 22
Remedy
Normal operation.
– Replace the toner cartridge.
– Replace the power supply board.
– Replace the image drum cartridge.
– After replacing the drum
cartridge, reset the drum counter
(refer to the User's Manual).
OKIPAGE 6e/6ex
Service Manual, P/N 59276401