Oki OKIPAGE 6e Service Manual page 195

Engine Menu
The following functions can be set in the Engine Menu.
(1) Print Position
For adjusting print start position.
(2) LED Head Marking No.
For adjusting LED Head marking duration.
(3) LED Head Width
For stipulating number of LED dots.
(4) Optical head
The mounting head type is set.
(5) Head type
The adjustment method for the adjustment head for 600 DPI is set.
(6) Page PRT
Valid or invalid of page count print of menu print is set.
(7) Wait table
The standby temperature 150°C or 135°C is set.
(8) Setting
For adjusting transfer current value.
(9) Enter
For entering the value newly set by the menu.
(10) Cancel
For canceling the value not yet entered.
Maintenance Utility D - 4 OKIPAGE 6e/6ex
Service Manual, P/N 59276401