Oki OKIPAGE 6e Service Manual page 128

2 -2-a 2 -2-b
• Yes
• Yes Is the transfer roller rotating?
• No
• Yes Is the fuser unit being installed properly?
• No
•Yes Is the image drum unit being set properly?
• No
• Yes Clean the write sensor on the power supply board or replace the power supply
board.
Troubleshooting
Replace the Main Control PCB.
Check the gears (TR gear, idle gear and reduction gear).
Install the fuser unit properly.
Set the image drum unit properly.
6 - 29
Service Manual, P/N 59276401
OKIPAGE 6e/6ex