Head Type Setting - Oki OKIPAGE 6e Service Manual

Standard tray paper feed setting
• Do no change its default setting since this is a factory setting and were set at the
factory.
Second tray paper feed setting
• Do no change its default setting since this is a factory setting and were set at the
factory.
Second tray download table selection
• Do not change its default setting since this is a factory setting and were set at the
factory.
Multi-purpose feeder setting
• Do not change its default setting since this is a factory setting and were set at the
factory.
Multi-purpose feeder download table selection
• Do not change its default setting since this is a factory setting and were set at the
factory.
Setting of standby temperature
Engine test selection
• Do not change its default setting since this is a factory setting and were set at the
factory.
Engine reset
• All EEPROM areas used by the engine block are reset to the factory default values.
The following items are excluded.
•
•
•
•
•
•
•
•
• Transition to the operation mode occurs completion of resetting.
Diagnostics Tests
Menu level-1
Menu level-2
Operator panel menu disable/enable
Head drive time setting
Head width setting

Head type setting

Transfer current setting
Page print disable/enable
C - 6
Service Manual, P/N 59276401
OKIPAGE 6e/6ex