Pc Display Messages (Table 6-1) - Oki OKIPAGE 6e Service Manual

PC Display Messages (Table 6-1)

Category
PC display status message
Controller errors Controller Error
Program ROM Check
Error
Font ROM Check Error
Resident RAM Check
Error
EEPROM Check Error
Troubleshooting
Trouble or status
An error occured in the controller.
An error was detected by program
ROM check.
An error was detected by font ROM
check.
An error was detected by resident
RAM check.
An error was detected by EEPROM
check.
6 - 4
Remedy
– Normal operation cannot be
ensured.
Turn the power off, then back
on to restart.
– If normal operation is not
recovered by this restart
procedure, replace the Main
Control PCB.
– Replace the Main Control PCB.
– When replacing the Main
Control PCB, upload/download
the EEPROM data. (Refer to
4.3.1-4.)
– Replace the Main Control PCB.
– When replacing the Main
Control PCB, upload/download
the EEPROM data. (Refer to
4.3.1-4.)
– Replace the Main Control PCB.
– When replacing the Main
Control PCB, upload/download
the EEPROM data. (Refer to
4.3.1-4.)
– Replace the Main Control PCB.
– When replacing the Main
Control PCB, upload/download
the EEPROM data. (Refer to
4.3.1-4.)
OKIPAGE 6e/6ex
Service Manual, P/N 59276401