Oki OKIPAGE 6e Service Manual page 190

1.4 Factory User Setting Operation
• Switching of ODA, OEL, and OKI-INT users settings is possible with the factory user setting
operation.
Factory Default Settings
The user factory user setting operation is carried out by turning the power ON while
keeping both the Menu key and the NEXT+ or LAST- key pressed down.
Factory ODA Setting Operation
Turn the power ON while keeping the Menu key and NEXT+ key press down.
Factory OEL Setting Operation
Turn the power ON while keeping the Menu key and LAST- key pressed down.
Power On
When the INTA menu key and the PAPER SIZE key are pressed at the same time, the
power is turned on.
When the INTL menu key and the TRAY TYPE key are pressed at the same time, the
power is turned on.
• After executing a factory user setting operation, set the EEPROM areas which are for other
than the engine block, to the factory default values.
Note 1: At the time of shipment from the factory, settings corresponding to the destination are
made at the factory.
Diagnostics Tests C - 9
Service Manual, P/N 59276401
OKIPAGE 6e/6ex