Oki OKIPAGE 6e Service Manual page 109

Category
PC display status message
Daily status Manual Paper In
Reset
Ready Toner Low
Ready Toner Sensor
Problem
Toner Sense
Ready Change Drum
Unit
Troubleshooting
Table 6-1 (Cont'd)
Trouble or status
There is a paper on the manual tray.
The data which remained unprinted
in the buffer is deleted and the
printer is initialized to user default
settings. The temporary DLLs and
macro are deleted.
Toner is running out.
Normal operation can be continued.
A fault occurred in the toner sensor.
Normal operation can be continued.
Image drum is running out.
Normal operation can be continued.
6 - 10
Remedy
– Replace the toner cartridge.
– Replace the power supply board.
– Replace the image drum unit.
– After replacing the drum unit,
reset the drum counter. (Refer
to the User's Manual.)
OKIPAGE 6e/6ex
Service Manual, P/N 59276401