Microphone Operation Modes - Shure DDS 5900 User Manual

Digital discussion system
Hide thumbs Also See for DDS 5900:
Table of Contents

Advertisement

Microphone Operation Modes

The operation mode determines how delegate microphones
function during a meeting. Several factors may affect the
meeting requirements and the manner in which the meeting
is run: room size, number of participants, formality of
the event, and amount of technical support on staff. The
operation mode addresses these factors with four presets
to control the microphone behavior.
Description of Operation Modes
The following is a description of each mode once the
Speak button is pressed:
Auto (Automatic)
Automatically turns on the delegate microphone if there is
room in the speaker list. In this mode, there is no request
queue: if the Speaker List is full, the delegate microphone
does not turn on.
Manual
Adds the delegate to a request queue that is managed by
the chairman. The Chairman selects delegate microphones
from the queue list, and turns them on and off. Manual
is the only mode in which the web browser is required to
manage talkers.
FIFO (First In, First Out)
Automatically turns on the delegate microphone if there is
room in the speaker list. Once the list is full, delegates are
placed into a chronological request queue. The microphone
turns on automatically once a space is open in the speaker
list.
Delegate Interrupt Mode
This mode determines the behavior of delegate microphone
units when the speaker list is full:
• Off (default): A delegate unit cannot turn on until a
space is available in the speaker list.
• On: A delegate microphone can turn on even when
the speaker list is full. This turns off the microphone of
the delegate that has been in the list the longest (at the
bottom of the Speaker List).
To change the mode:
• CU hardware:
Delegate Setup
• Browser interface:
Operation
page.
Microphone Control
VOX (Voice Activation)
The microphone automatically turns on when a delegate
talks into the microphone or presses the Speak button.
The microphone automatically turns off after the talker is
finished. In this mode, there is no request queue: if the
Speaker List is full, the delegate microphone does not turn
on.
This delegate is removed from the
list when another microphone is
turned on
Speaker List with a Maximum of 3 Speakers
46
Running a Discussion
>
Operation Mode
>
or from the
Operation Mode

Advertisement

Table of Contents
loading

Table of Contents