CONGRATULATIONS! The LX88-II Wireless System is the finest in its class. This system will give you excellent performance for years to come. SYSTEM CONTENTS The LX88-II Wireless System contains the following components: One LX88-II dual channel wireless receiver Two transmitters available in one of three different combinations (see System...
LX88-II Receiver Features & Controls (Figure 1) FRONT BACK LX88-II DUAL CHANNEL RECEIVER FEATURES & CONTROLS FIGURE 1 Front 1. Power Indicators. RF Signal Indicators. Yellow indicates when RF (radio frequency) signals are re- ceived from the transmitter. Audio Peak Indicators. This light flickers occasionally in normal operation; is ON steadily when the audio input is overloaded.
8. Battery Compartment. Access to the battery. SYSTEM INSTALLATION MOUNTING THE RECEIVER The LX88-II Dual Channel Wireless Receiver can be mounted in two ways: as a stand-alone unit or as a rack-mount unit. As a Stand-Alone Unit (Figure 4) 1. Turn the unit upside-down.
INSTALLING THE ANTENNAS FIGURE 8 If you wish to front mount the antennas, ask your Shure dealer for information on the WA503 Front Mount Conversion Kit. If you wish to remote mount the antennas, ask your Shure dealer for informa-...
Slide the transmitter POWER ON/OFF switch to the PWR position. Check the bat- tery level. See Checking the Transmitter Battery . 3. Check the RF indicator on the LX88-II receiver to see if the radio signal is being received. 4. Slide the transmitter ON/MUTE switch to the ON position and begin speaking or singing.
Page 8
(Figure 16). 3. Press the POWER button on the LX88-II receiver ON. 4. Turn the transmitter POWER switch ON. 5. Check the RF Signal Indicator on the LX88-II receiver to see if the RF signal is being received. WM98 MIC &...
The transmitter audio gain control has been factory preset to provide satisfac- tory output. However, if the PEAK light on the LX88-II receiver is constantly on or never on, the transmit audio level may require adjustment. Use the gain con- trols as follows to adjust the equipment for the best sound quality.
LX1: 82.6 mm H x 63.5 mm W x 26.2 mm D (3 LX2/58: 241 mm L x 50.8 mm Dia. (9 LX88-II: 44 mm H x 349 mm W x 194mm D (1 3/4 x 13 3/4 x 7 5/8 in) Net Weight LX1: 79.5 g (2.8 oz) without battery...
RK143G and a brief description of the problem. Do not mail any units or parts to Shure 53A8247A unless requested to do so by Shure’s Service Department. Any returned items 90A8380 must have prior authorization.