Using The Discussion Units; Attach The Touch-Button Overlay; Securing The Microphone; Program The User Type - Shure DDS 5900 User Manual

Digital discussion system

Hide thumbs Also See for DDS 5900:

Table of Contents

Using the Discussion Units

Attach the touch-button overlay to each unit for basic microphone control. The discussion units use soft buttons that

change functionality when programmed to different unit types. Button overlays are supplied with the discussion unit or with

the central unit.

Warning: Overlays are not reusable. If a unit needs to be reconfigured, carefully remove the overlay and

apply another one.

1. Choose an overlay for the unit.

2. Remove the protective paper from the back.

3. Place the overlay in the recess on the front of the unit.

To lock the microphone into place, use the supplied hex key and turn counterclockwise.

DIS GM: Simply insert the microphone into the XLR socket. Adjust the gooseneck for proper position.

Shure MX4xxRLP: Attach the AC 5901 XLR/Microflex adapter to the microphone. Insert the adapter into the XLR socket

of the flushmount unit.

DDS 5900 discussion units are programmable, changing the function of the control buttons to support different user types.

The three types are chairman, delegate, or interpreter, each requiring unique control functionality. The setting is stored in

the unit, and persists after a power cycle.

Note: Flushmount units are not programmable as interpreter stations. Use the portable DC 5980 P unit for

simultaneous interpretation.

Flushmount Units

To program the flushmount DC 5900 F discussion unit as a chairman or delegate, simply attach the button overlay. The

overlay automatically programs the unit with the correct button functionality.

Reboot the system once all the overlays are attached to establish the configurations with the CU.

Table of Contents