Portable Unit
Program the portable units by pressing the volume buttons and scrolling to the desired mode.
1. Power on the unit by properly connecting it to the DCS-LAN chain.
2. Press and hold the '-' and '+' volume buttons. The Speak light flashes to indicate the unit is ready for programming.
3. While continuing to press the volume buttons, press the channel scroll to the unit type. The type is indicated by the
combination of channel LEDs; see the table below.
Changing Unit Type
Unit Type
Ch. 1
Delegate with mute
Off
Delegate without mute On
Chairman
Off
Interpreter
On
Ch. 2
Off
Off
On
On
32
Using the Discussion Units