Shure DDS 5900 User Manual page 24

Installation
Wireless Language Distribution
For additional monitoring, connect a wireless language distribution system to the one of the CU audio outputs. Use the
browser interface to select to route the desired microphones (seat) to that group output. The DCS 6000 Digital Infrared
Language System transmits this audio signal to a number of listening stations.
Analog outputs to digital transmitter IR radiator Receivers
Interpreter Units
Wireless Language Distribution
Emergency Signal
Input 2 is designed to broadcast an Emergency Evacuation Message (EEM), overriding the discussion in the event of an
emergency. A switch (normally-open) must be connected to the emergency switch connector. When the switch is closed
an "Emergency Evacuation Message (EEM)" audio signal present on the 'In 2' input is distributed to all output channels,
overriding all other audio inputs.
Note: There is no level adjustment for input 2. The level of the signal must be controlled externally.
24