CLEAN ONLY with dry cloth. user’s responsibility, and licensability depends on the user’s classification and appli- cation, and on the selected frequency. Shure strongly urges the user to contact the DO NOT block any ventilation openings. Allow sufficient distances for adequate appropriate telecommunications authority concerning proper licensing, and before ventilation and install in accordance with the manufacturer’s instructions.
Full Manual Online Model Variations This guide is a quick reference covering the essential features and functions of the QLX-D system. Model variations with additional components are available to meet specific performance situations. A comprehensive version of the guide covering the following topics is available online by visiting www.shure.com...
② Installing Batteries - AA Batteries: Place batteries (note polarity markings) and AA Adaptor as shown - Shure SB900 Battery: Place battery as shown (note polarity markings), remove AA Adaptor from bodypack transmitter, stow AA Adaptor in door for handheld transmitter Note: If using AA batteries, select a battery type from the transmitter menu to ensure accurate battery metering.
Indicates remaining battery life. increments. ⑮ SB900 Battery Runtime When the transmitter is powered by a Shure SB900 rechargeable battery, remaining runtime is displayed in hours:minutes. Navigating the Receiver Menus The receiver has a main menu for setup and configuration and an advanced menu to access addi- tional receiver functions.
Page 7
Requires 2 AA batteries or a Shure SB900 rechargeable battery. mic o set ⑦ AA Battery Adapter Secures batteries when powering transmitter with AA batteries instead of Shure SB900 battery. group channel ⑧ Bodypack Antenna For RF signal transmission.
To ensure accurate display of transmitter runtime, set the battery type in the transmitter menu to match the installed AA battery type. If a Shure SB900 rechargeable battery is installed, selecting a battery type is not necessary and the battery type menu will not be displayed.
A wireless audio channel is formed when a receiver and transmitter are tuned to the same fre- quency. To ease setup, frequencies available to the QLX-D system are organized into groups and Single chargers and multiple bay chargers are available to recharge the Shure batteries.
Manual Frequency Selection Use the arrow buttons to add or remove the lock options shown next to the lock icon. Press enter to save the lock settings. Manual frequency selection can be used instead of groups and channels to set the transmitter and receiver to a specific frequency.
Encryption Mismatch Receiver display shows FAIL after en- lines different Shure products cryption is disable lines, such as QLX-D and ULX-D. Group and Channel display shows "--" Custom Group IR Sync Encryption Mode Perform an IR sync be- Err.003...
0 to 21 dB (in 3 dB steps) >70 dB, typical Battery Type RF Sensitivity Shure SB900 Rechargeable Li-Ion or AA batteries 1.5 V -97 dBm at 10-5 BER Dimensions Latency 86 mm x 65 mm x 23 mm (3.38in. x 2.57 in. x 0.92 in.) H x W x D,without antenna <2.9 ms...
Page 13
1 / 10 Conforms to electrical safety requirements based on IEC 60065. 710 to 782 1 / 10 The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance 710 to 782 1 / 10 Authorized European representative: 794 to 806...
FREQUENCIES FOR EUROPEAN COUNTRIES NOTE: This Radio equipment is intended for use in musical professional entertainment and Country Code Frequency Range similar applications. This Radio apparatus may be capable of operating on some frequencies Code de Pays Gamme de not authorized in your region. Please contact your national authority to obtain information Codice di paese frequences on authorized frequencies and RF power levels for wireless microphone products.
Need help?
Do you have a question about the QLX-D and is the answer not in the manual?
Questions and answers