Shure DDS 5900 User Manual page 55

Digital discussion system
Hide thumbs Also See for DDS 5900:
Table of Contents

Advertisement

<max speakers> Can be set from "1" to "8"
The CU issues the 'max_speakers' command.
Set the maximum number of requests
max_requests <max requests><CR>
Maximum number of delegates allowed in the request list.
<max requests> Can be set from "0" to "250".
The CU issues the 'max_requests' command.
Set the Operation Mode
mic_mode <mode><CR>
Set the system operation mode.
<mode> Can be set to "auto" (Automatic), "fifo" (First-in-
first-out), "manual" (Manual) or "vox" (Voice Active)
The CU issues the 'mic_mode' command.
Set the Interrupt Mode
mic_interrupt <mode><CR>
Set the ability to interrupt. Defines, whether microphones
should interrupt or not.
<mode> Can be "on" (microphones interrupt) or "off"
(microphones do not interrupt)
The CU issues the 'mic_interrupt' command
Commands from CU 5905 to External Control
Microphone On
mic_on <seat no><CR>
A microphone is turned on.
Microphone Off
mic_off <seat no><CR>
A microphone is turned off.
Microphone into Request List
mic_request_on <seat no> <request position><CR>
A microphone is inserted into the request list.
<request position> provides information about the position
in the request list.
Microphone out of Request List
mic_request_off <seat no><CR>
A microphone is removed from request list.
Retrieve the Microphone Status
mic_status<CR>
Ask the CU to deliver status of the system (microphones in
speak, and microphones in request list).
The CU issues the microphone system status. The status is
a list of commands from the CU:
seat_number (for all microphones in the system)
mic_mode
mic_interrupt
max_total_speakers
max_speakers
max_requests
mic_on (for all microphones on)
mic_request_on (for all microphones in request list)
mic_status_done
Help
help<CR>
help <command><CR>
Help is available for all commands supported by the CU. If
a command is included after the help command, details on
that command is issued by the CU.
The help command results in a brief description of the
command being issued by the CU. This command is
intended for use on a simple console.
Max Total Speakers
max_total_speakers <max total speakers><CR>
Maximum number of speakers allowed to speak.
<max total speakers> "1" to "8"
Max Delegate Speakers
max_speakers <max speakers><CR>
Maximum number of delegates allowed to speak.
<max speakers> "1" to "8"
Max Requests
max_requests <max requests><CR>
Maximum number of delegates allowed in the request list.
<max requests> "0" to "250".
Operation Mode
mic_mode <mode><CR>
55
External Control Protocol

Advertisement

Table of Contents
loading

Table of Contents