Clarke Focus II Micro Rider 26D Service Manual page 15

ENGLISH
GENERAL INFORMATION
MACHINE NOMENCLATURE (Continues)
51. Reverse gear activation/deactivation switch
52. Reverse gear LED indicator
53. Detergent concentration control switch (*)
54. Detergent concentration LED indicators (*)
55. Mute function switch
56. Mute function switch LED
57. Horn switch
58. Ignition key
59. Solution flow increase switch
60. Solution flow decrease switch
61. Solution flow quantity LED indicators
62. Battery warning lights
• Green warning light - charged battery
• Yellow warning light - semi-discharged battery
• Red warning light - discharged battery
63. Brush/pad-holder deck and squeegee lifting/lowering
switch
64. Brush/pad-holder deck and squeegee lifting/lowering LED
indicator
65. Vacuum system and squeegee lifting/lowering switch
66. Vacuum system and squeegee lifting/lowering LED
indicator
67. Extra-pressure switch
68. Extra pressure led indicator
64
63
67
68
65
66
53
12
62
60 59
61
54
69. Drive speed adjusting switches (enabled only when the
brushes are running)
70. Drive speed LED indicators
71. Hour counter and solution level display:
• When the machine is started, it displays for a few
seconds the number of working hours which have been
performed.
• While using the machine, it displays the solution/
washing water level in the tank (in percentage).
• When the level is above 90%, the display indicates
"FUL".
• When the level is under 30%, the display indicates
"LO".
• When the tank is almost empty, "LO" starts flashing.
NOTE
The display could indicate "LO" even if the tank is
not completely empty, thus allowing to complete
the cleaning cycle; in any case, it is recommended
to check the actual solution flow supplied to the
brushes.
72. Anti-skid control activation LED indicator
73. Steering wheel height control lever
(*) Only for machines with Chemical Mixing System (optional)
71 72
69
70
Service Manual - FOCUS II Micro Rider
57
56
55
51
52
58
73
P100460