Oem Ipmi Commands - Advantech MIC-3396 User Manual

3.8

OEM IPMI Commands

To provide custom, board-specific functionality, the BMC supports additional com-
mands that are not covered by the PICMG or IPMI specification
Advantech management solutions support extended OEM IPMI command sets,
based on the IPMI defined OEM/Group Network Function (NetFn) Codes 2Eh, 2Fh.
The first three data bytes of IPMI requests and responses under the OEM/Group Net-
work Function explicitly identify the OEM vendor that specifies the command func-
tionality. To be more precise, the vendor IANA Enterprise Number for the defining
body occupies the first three data bytes in a request, and the first three data bytes fol-
lowing the completion code position in a response.
Advantech's IANA Enterprise Number used for OEM commands is 002839h.
The BMC supports all Advantech IPMI OEM commands listed in below table.
Table 3.8: OEM command list
Command
Store Configuration Settings
Read Configuration Settings
Read Port 80 (BIOS POST Code)
Reload NVRAM defaults
Read MAC Address
Load Default Configuration
NetFn
2Eh
2Eh
2Eh
2Eh
2Eh
2Eh
61
CMD
40h
41h
80h
81h
E2h
F2h
MIC-3396 User Manual