Before You Start - Stairmaster StepMill 3 Assembly Manual

Before you Start

_____________________________________________________
® ®
IMPORTANT:
Locate the area where you will assemble and use your StairMaster StepMill 3. We recommend you install it on a hard,
level surface. Allow an assembly area of at least 36" (0.91m) on each side and behind the machine. You can put the rear
of the machine closer to the wall during use.
Basic Assembly:
Follow these basic assembly tips when putting together your machine:
1. Collect all the pieces needed for each assembly step.
2. Read through and understand the instructions.
3. Turn all bolts and locknuts to the right to tighten, and the left to loosen.
4. Lightly and carefully lift pieces when attaching. Look through the bolt holes to help guide bolt placement.
5. Two people are recommended to assemble this machine.
6
Assembly Manual