Stairmaster StepMill 3 Assembly Manual page 12

_____________________________________________________
Front Shroud tab for precise align-
ment with Mast Shroud
Item 22
FIGURE 4a
Assembly
Flange on Mast Shroud for secure
seal between both shrouds
Item 5
Assembly Manual
Step 4: Attach & Fasten Shrouds
Using screws (item 5), attach Front Shroud
4-1
(item 23) to frame by positioning it into loca-
tion and allowing it interlock with the Mast
Shroud (item 22) as shown in figure 4a.
Note: Ensure both shrouds seat flush be-
fore fully tightening all five screws.
4-2
Attach the Mast Gasket (item 17) by aligning
the cut away with the Mast Shroud cut out
(Figure 4b).
Item 23
Item 17
Item 22
12
Mast Gasket cut away
must align with Mast
Shroud cut out
Mast Shroud cut out
FIGURE 4b