Stairmaster StepMill 3 Assembly Manual page 10

_____________________________________________________
Rotate left to raise and right to lower
FIGURE 3a
Item 16
Item 22
FIGURE 3b
Console Cable
FIGURE 3c
Assembly
Wire Tie
Assembly Manual
Step 3: Attach the Mast
3-1
Ensure machine is stable and on a level surface. Adjust
any or all four feet if necessary. (Figure 3a)
Slide the Mast Shroud (item 22) onto the Mast (item 16).
3-2
(Figure 3b)
3-3 Using the wire tie within the Mast, wrap the wire tie
around communication cable located at the top mast
mounting area on the machine. (Figure 3c)
3-4
Pull the wire tie at console mounting end of Mast and
feed the communication cable out the square opening of
the Mast exposing the cable. (Figure 3d)
FIGURE 3d
10
Wire Tie