Stairmaster StepMill 3 Assembly Manual page 15

_____________________________________________________
FIGURE 7a
On/Off Switch
Assembly
Power Source Inlet
FIGURE 7b
Assembly Manual
Step 7: Connecting Power to machine
7-1
Select power cord that coincides to the local electrical
standard outlets (Figure 7a).
7-2
Check that the input AC power rating detailed on the se-
rial number decal matches the available power.
7-3
Insert power cord into the power source inlet (Figure 7b)
To reduce the risk of electrical shock, fire, and to prevent
severe damage to the machine, use only the power sup-
ply approved for use with this equipment. In addition,
your machine must be properly grounded.
Step 8: Final Check
Failure to visually check and test assembly before use
can cause damage to the equipment. It can also cause
serious injury to users and bystanders.
8-1
Tighten all hardware.
8-2
Refer to Owner's Manual for Operating.
15