Power Connection; Input Connections - Extron electronics SMP 351 User Manual

Streaming media processor
Hide thumbs Also See for SMP 351:
Table of Contents

Advertisement

Power Connection

100-240 VAC power input – Connect the provided IEC cord. Verify the front panel
A
buttons and LCD illuminate (see

Input Connections

The audio and video inputs are grouped into channel A and channel B. Channel A analog
audio input can be selected for video inputs 1 or 2 (
selected for video inputs 3 (
HDMI input (1 and 2) – Connect an HDMI (or DVI with suitable adapter) source device
F
to input 1 and input 2.
NOTE: Channel A (inputs 1 and 2) is optimized for full
range sources such as PCs. When using a video source
with adjustable quantization range on these inputs, select
"Full Range" for the most accurate video reproduction.
Channel A analog audio input – Connect a balanced or unbalanced stereo line level
G
audio device to this 5-pole, 3.5 mm captive screw connector. Channel A audio can be
selected for output with HDMI inputs 1 and 2 instead of the embedded audio. Wire the
connector as shown in figure 4.
Tip
Ring
Sleeve(s)
Tip
Ring
Balanced Stereo Input
(high impedance)
Figure 4.
Analog video input 3 – Connect component video to
H
the three BNC connectors (B-Y, R-Y, VID/Y). Connect a
composite video signal to the VID/Y BNC connector.
HDMI input 4 – Connect an HDMI (or DVI with suitable
I
adapter) source device to input 4.
Serial digital video input 5 (SMP 351 3G-SDI only) –
J
Connect a 3G/HD/SDI video signal to this BNC connector.
Channel B analog audio input – Connect a balanced or unbalanced stereo line level
K
audio device to this 5-pole, 3.5 mm captive screw connector. Channel B audio can be
selected from either the HDMI embedded audio, Ch B analog audio, or the audio can
be set to Off. Wire the connector as shown in figure 4.
Front Panel Features
), 4 (
), or 5 (
H
I
J
Tip
Left
Sleeve
Tip
Right
Sleeve
Unbalanced Stereo Input
(high impedance)
Audio Input Captive Screw Connector Wiring
on page 18).
). Channel B analog audio can be
F
).
Left
Right
Do not tin the wires!
3
B-Y
R-Y
SMP 351 • Installation
AUDIO
HDMI
LOOP THRU
1
L
R
L
R
2
5
3G/HD/SDI
4
L
AUDIO
R
VID
/Y
HDMI
13

Advertisement

Table of Contents
loading

Table of Contents