Installation; Mounting The Studiostation 100; Rear Panel Overview; Power Connection - Extron electronics StudioStation 100 User Manual

Installation

This section provides information on:
•
•
•
Mounting the StudioStation 100
The StudioStation 100 is housed in a 1U high, half rack width, two piece metal enclosure
that can sit on a table with the provided rubber feet or can be mounted using the attached
rack mounts. Select a suitable mounting location, (see
on page 90) then choose an appropriate mounting option.
•
•

Rear Panel Overview

100-240V
50-60 Hz
A
Figure 3.
100-240 VAC IEC connector for power input
A
USB type A receptacle for external storage device
B
and activity LED
HDMI input
C
3.5 mm, 5-pole captive screw connector for analog
D
stereo audio input
HDMI preview output
E

Power Connection

A
Mounting the StudioStation 100
Rear Panel Overview
StudioStation 100 Rear Panel Reset
Disconnect power from all external devices before connecting to the StudioStation 100.
Do not apply power to the StudioStation 100 before connecting external devices.
0.7A
INPUTS
USB STORAGE
HDMI
B C
StudioStation 100 Rear Panel
100-240 VAC power input — Connect the provided IEC cord. Verify the front panel
buttons and LCD illuminate (see
NOTE: Make all external device connections to the StudioStation 100 before applying
power.
Mounting the StudioStation 100
OUTPUT
AUDIO
RS-232
L LINE R
HDMI Tx Rx G
D E F
3.5 mm, 3-pole captive screw connector for Simple
F
Instruction Set (SIS) control over RS-232
USB type A receptacle for remote control panel
G
RCP 101
12V, 2-pole captive screw external power output to
H
RCP 101
Reset button and LED
I
RJ-45 Ethernet connector for LAN connection
J
Front Panel Features
StudioStation 100 • Installation
REMOTE
StudioStation 100
+12V
CONTROL
1.0A MAX
RESET
LAN
G H I J
on page 16).
11