Symbol PDT 3400 Series Product Reference Manual page 82

PDT 3400 Product Reference Guide
5. If you used System File Edit to set up the system files, TCM presents a dialog box
displaying the contents of each system file built (refer to Figure 6-11).
/RP=2
/P=10
C:\STACVOL.46C
s Review and, if necessary, alter the contents of the system file to correct the order.
You can move lines, delete lines, etc., in the edit box.
s To accept the file as is, choose the OK button.
s To accept the first file and all other system files without further edits, choose the
Yes to All button.
s Choose Cancel to exit the build.
6. If you edit the file, the button choices change.
s To accept the file with the changes just entered, choose the Accept button.
s To undo the system file build and return to the file's original state before any edits
were appended, choose the Reject button.
s To exit the build, choose the Cancel button.
7. If you accepted changes made in the review box, TCM saves the edits to the current
build in progress. On the next build, TCM will display the system file as Saved.
s To accept the saved system file, choose the OK button.
s To delete the hand edits and build the file as new, choose the Rebuild button.
8. If you accepted the edits, TCM proceeds to build the hex image and create the hex
file.
6-24
21
Figure 6-11. System File Edits Dialog Box