Symbol PDT 3400 Series Product Reference Manual page 38

PDT 3400 Product Reference Guide
d. Slide the cap up the cable, over the power jack to the retainer and tighten by hand
until secure (Figure 3-9).
3. Install the communications cable connector in the RS-232 communications port.
Communications Cable
Figure 3-10. Installing Communications Cable
4. Install the cradle on the dash or other appropriate mounting surface using the
appropriate hardware.
5. Connect the communications cable to the host as directed in the section Connecting
the Cradle(s): To the Host.
3-8
Retainer
Cap
Figure 3-9. Securing Power Jack
Power Jack
Cable
Null Modem Cable