Symbol PDT 3400 Series Product Reference Manual page 72

PDT 3400 Product Reference Guide
To see all the directories and files a script places in the compressed volume, double
click on the CMP: indicator in the left-hand pane of the Script Window.
If only a C: ROM Disk is used (no D: ROM Disk or User Space), set the image size
to the maximum size possible for the configuration's flash chip (393216 for .5 MB
flash, 2490368 for 2.5 MB, or 4587520 for 4.5 MB Flash). Set the image size for the
C: ROM Disk image size smaller if a D: ROM Disk and/or a User Space will be used.
Note: For the first build, we recommend setting the image size to the
maximum size allowed, and resetting (downsizing) the size later when
the actual image size is known.
The hex file resulting from the build is normally larger than the image;
do not use the hex file size as a guide for determining the hex image
size.
6. If the image is bootable, check the box. If the image is not bootable, clear the check
box.
Set the C: drive to be bootable. The D: drive cannot be bootable. TCM ignores a
bootable setting for the D: drive.
7. Determine whether the output from a build is a hex file or a "build" to a disk
(directory) on the development PC.
If you choose to build to disk, verify that the directory where the build will be placed
is empty. The build to disk deletes any files in the directory selected.
a. If Hex File is chosen, select the hex file format used to encode the image for
transfer to the PDT 3400. The hex file choices are:
- Standard
- Compressed
- Binary
- Transparent.
6-14