Symbol PDT 3400 Series Product Reference Manual page 37

a. Slide the cap over the power jack and on to the power cable (Figure 3-6).
Figure 3-6. Installing Cap on Power Jack
b. Slip the washer on the cable and slide it to fit against the back of the power jack
(Figure 3-7).
Figure 3-7. Installing Washer on Power Jack
c. Insert the power jack in the power cord retainer on the back of the vehicle cradle
(Figure 3-8).
Figure 3-8. Installing Power Jack in Retainer
Power Jack
Back of
Washer
Power Jack
Retainer
Installing the Hardware
Cap
Cable
Power Jack
3-7