Figure 6-6. Setting the Communications Parameters
6. In the Stop Bits field, set the time between transmitted characters (default = 1).
7. In the Flow Control field, set the method of controlling data flow (default = None).
Note: Transparent hex files cannot use software flow control. All of the hex
files can use hardware flow if the correct cable is attached and
software honoring hardware flow control is loaded on the PDT 3400.
8. Choose the OK button to save the parameters and exit.
Save the Script
To save the changes to a new script:
1. Choose File | Save As from the menu bar.
OR on the toolbar, choose the Save button.
2. Enter the path and file name. TCM appends a .TCM extension to the script.
3. Choose the OK button.
Note: If you save an untitled script, TCM by default saves the script to the
directory that the Script Browser is pointing to.
Terminal Configuration: Building and Sending the Hex Image
6-17