Mitsubishi ECLIPSE Owner's Manual page 345

Comfort controls
To unlock locked channels
You can unlock one or all locked channels. Unlocking one or
more channels requires entry of the code.
NOTE
The code is set to "1111" at the factory.
It is possible to change the code to any desired number
using "CODE EDIT".
1. If you wish to unlock a single desired channel, select the
channel you wish to unlock. (If you wish to unlock all
locked channels, it doesn't matter which channel you
select.)
2. Push the AUDIO switch (6) for at least about two seconds
to select the MENU mode. Then select the LOCK setting
mode.
3. In the LOCK setting mode, turn the AUDIO switch (6) to
select "UN LOCK" if you wish to unlock a single desired
5
channel or "UN LOCK AL" if you wish to unlock all
locked channels.
4. Push the AUDIO switch (6). The code entry window will
display.
5-54
5. Use the memory selection buttons (7) to enter the code
(1111 to 6666).
N00761700041
6. If you entered the correct code, the channel lock setting
will be cancelled and the system will return to the LOCK
setting mode.
If you entered an incorrect code, a warning sound will be
emitted and "CODE E" will be displayed. Then, the code
entry window will again display. You can retry the code
entry any number of times.