Mitsubishi ECLIPSE Owner's Manual page 348

To listen to a CD
1. Press the CD button (6) and the CD mode will be selected,
starting a playback.
NOTE
As many as 6 CDs can be inserted into the CD
autochanger.
2. To adjust the volume and tone, refer to "To adjust the vol-
ume" on page 5-40 and "To adjust the tone" on page 5-41.
3. To stop the CD, turn off the power by pressing the PWR
switch (1) or switch to the other mode by pressing the
RADIO button (5).
NOTE
For information concerning the handling of the compact
discs, refer to "Handling of compact discs" on page 5-71.
To set a disc
The indicator light (A) shows the condition of each CD slot.
N00735500905
Light off: No disc
Amber: CD is set
Green: CD is played (or selected)
To set a disc:
1. Press the LOAD/EJECT button (2).
2. Press one of the Disc select buttons (4) to select the CD
which you wish to insert.
3. If there is already a CD loaded in the slot, the CD is auto-
matically ejected. If there is no CD, insert the CD in the
slot (3) after the READY light (B) illuminates.
Comfort controls
5
5-57