Mitsubishi ECLIPSE Owner's Manual page 204

Every time the reset button (1) is pressed lightly (less than one
second), the indicators are changed.
Type 1
Type 2
ODO-Odometer
The odometer shows the total distance the vehicle has traveled.
TRIP-Trip odometer
The trip odometer shows the distance traveled since the last
time it was reset.
There are two trip odometer displays:
TRIP can be used to measure the distance traveled since
the current trip began.
At the same time, TRIP
tance from a second location.
To reset the trip odometer
To zero the counter, press and hold the reset button for more
than one second. Only the currently displayed value will be
reset.
If TRIP is displayed, for example, only TRIP
reset.
NOTE
Both TRIP and TRIP
9999.9 miles/kilometers.
Even when the engine has been stopped, the odometer/trip
odometer indication is given for about 30 seconds if any
of the following steps is taken.
• The ignition key is turned to the "OFF" position.
• The driver's door is opened.
• The odometer/trip odometer reset button is pressed.
If the battery is disconnected for a long time, both of these
displays will be reset to "0".
Features and controls
and .
can be used to measure the dis-
will be
can measure trips up to
3-109
3