Mitsubishi ECLIPSE Owner's Manual page 219

Features and controls
NOTE
If you drive through multiple 360° turns but calibration is
still not successfully completed, try performing the cali-
bration procedure in an open space that is completely free
of rail lines, tall buildings, and high-voltage power lines.
The display (A) will show "
stances.
If this happens, repeat the procedure starting with step 1.
• The "H" button is pressed again after selection of the
compass calibration mode.
• The vehicle is driven through one or more 360° turns for
compass calibration, but the procedure is not successful.
3
3-124
" in the following circum-
Error message
In the event of a malfunction in the electronic compass, the dis-
play (A) will show "EE".
Please have your vehicle inspected at an authorized Mitsubishi
Motors dealer or a repair facility of your choice.
N00553200016